Learn ETABS & SAFE in the Structural Design of 15 Stories RC
- Description
- Curriculum
- FAQ
- Reviews
This course not just a tutorial on software ETABS and SAFE but it is a complete understanding about structural design analysis, how civil engineer must begin with the project, how he/she must think, how we can determine the dimension of the element before modeling them check it in the software. In this course we will design a 15 stories of a residential buildings, within the work we will define and design all types of slabs such as (waffle slab, one way ribbed slab, two way ribbed slab, flat slab and solid slab), all types of foundations such as (isolated,combined,strip and mat), earthquake with static and dynamic case, wind loads, columns and beams and shear walls + Advanced lectures in ETABS + Advanced lecture in SAFE and AllPile (design piles deep foundation of a tower of 25 stories) + design a swimming pool in ETABS
Example 2 Design a mosque with the Dome and minaret + piles foundation of the minaret to resist tension stresses in foundation we will use in the design ETABS, SAFE, SAP2000 software + learn how to design beams using SAP2000 + how to model the dome in ETABS or SAP2000
How to Model dampers in ETABS (Fluid Viscous damper FVD) and show the effect f using this type of damper on story displacement of the building
How create report and detailing drawings in ETABS
-
1Introduction Part 1 Description of the project and courseVideo lesson
Introduction to the course, what we will learn ? Description of the project worked on. Also in this section we define the dimension of columns, Shear Walls, and Retaining Walls for design and check them in the Software.
-
2Introduction Part 2 Definition of Waffle slabs, types, thickness of Waffle SlabVideo lesson
Definition of Waffle Slabs, types of Waffles Slabs, when we use Waffle Slab type 1, how we determine the thickness of Waffle Slab to design and check it in the Software.
Definitions of hidden beams and calculation of beams dimensions width and depth
-
3Introduction Part 3 Waffle Slab Type 2 or Two Way Ribbed SlabVideo lesson
Definition of Waffle Slabs, types of Waffles Slabs, when we use Waffle Slab type 2, how we determine the thickness of Waffle Slab to design and check it in the Software.
Definitions of hidden and drop beams and calculation of beams dimensions width and depth
-
4Introduction Part 4 One Way Ribbed SlabVideo lesson
Definition of Ribbed Slab, when we use Ribbed Slab, how we determine the thickness of Ribbed Slab to design and check it in the Software.
Definitions of hidden and drop beams and calculation of beams dimensions width and depth
-
5Introduction Part 5 Flat SlabVideo lesson
Definition of Flat Slab, when we use Flat Slab, how we determine the thickness of Flat Slab to design and check it in the Software.
Definitions of drop beams and calculation of beams dimensions width and depth
-
6Introduction Part 6 Solid SlabVideo lesson
Definition of Solid Slab, when we use Solid Slab, how we determine the thickness of Solid Slab to design and check it in the Software.
Definitions of drop beams and calculation of beams dimensions width and depth
-
7Introduction Part 7 StairsVideo lesson
How we can easily modeling the stairs and design them in the Software
-
8Lecture 1: Export from AutoCad to ETABS quick method of drawing and modelingVideo lesson
In this class we did not start learning the program, but only a quick way to draw and to model the building from exporting from AutoCad to ETABS
-
9Lecture 2 Define number of stories, heights, and grids on EtabsVideo lesson
-
10Lecture 3 Define MaterialsVideo lesson
-
11Lecture 4 Define SectionsVideo lesson
-
12Lecture 5 Shear Walls Drawings and Pier Labels assignVideo lesson
-
13Lecture 6 Retaining Walls DrawingVideo lesson
-
14Lecture 7 Columns DrawingVideo lesson
-
15Lecture 8 Beams DrawingVideo lesson
-
16Lecture 9 Stairs DrawingVideo lesson
-
17Lecture 10 Slabs DrawingVideo lesson
-
18Lecture 11 Meshing of Slabs and WallsVideo lesson
-
19Lecture 12 Supports ModelingVideo lesson
-
20Lecture 13 Define loads on slabsVideo lesson
-
21Lecture 14 Loads on the beamsVideo lesson
-
22Lecture 15 Define earthquake Loads static caseVideo lesson
-
23Lecture 16 Define Earthquake Loads Dynamic caseVideo lesson
-
24Lecture 17 Define wind loadsVideo lesson
-
25Lecture 18 Define DiaphragmsVideo lesson
-
26Lecture 19 Define mass sourceVideo lesson
-
27Lecture 20 Define modal casesVideo lesson
-
28Lecture 21 Define stiffness modifiersVideo lesson
-
29Lecture 22 Check the modelVideo lesson
-
30Lecture 23 Define loads combinationsVideo lesson
-
31Lecture 24 Center of mass and center of rigidityVideo lesson
-
32Lecture 25 Scale earthquake loadsVideo lesson
-
33Lecture 26 Check story displacementVideo lesson
-
34Lecture 27 Check story driftVideo lesson
-
35Lecture 28 Columns designVideo lesson
-
36Lecture 29 Shear wall designVideo lesson
-
37Lecture 30 Prepare the model for exporting to safeVideo lesson
-
38Lecture 31 Check Deflection in SafeVideo lesson
-
39Lecture 32 Waffle Slab and beams designVideo lesson
-
40Lecture 33 Ribbed slab designVideo lesson
-
41Lecture 34 Flat and solid slabs design and punching shear checkVideo lesson
-
42Lecture 35 Isolated foundation designVideo lesson
-
43Lecture 36 Combined foundation designVideo lesson
-
44Lecture 37 Strip foundation designVideo lesson
-
45Lecture 38 Mat foundation designVideo lesson
-
46Thank youVideo lesson
-
47Advanced Tricks in ETABS to change the model.Video lesson
-
48Advanced How to Draw L Shape column in ETABS with section designerVideo lesson
-
49Advanced How to draw Stairs in ETABSVideo lesson
-
50Advanced Design a swimming pool in ETABSVideo lesson
-
51Advanced P-delta check in ETABSVideo lesson
-
52Lecture 52: Advanced SAFE Design Piles foundation in ETABS, SAFE and ALLPILESVideo lesson
-
53Lecture 53 Advanced ASCE code earthquake definitionVideo lesson
-
54Lecture 54: Advanced Nonlinear Pushover AnalysisVideo lesson
-
55Lecture 55: Advanced Soft story check irregularityVideo lesson
-
56Lecture 56: Example 2 Design of a mosque: definition and prepare DXF fileVideo lesson
-
57Lecture 57: Example 2 Design of a mosque: modeling in ETABSVideo lesson
-
58Lecture 58: Analysis and design of columns, slab and beams in ETABS SAFE and SAPVideo lesson
-
59Lecture 59: Example 2 Design of a mosque: Analysis and design of the Dome in SAPVideo lesson
-
60Lecture 60: Analysis and design of the minaret + foundation in ETABS and SAFEVideo lesson
-
61Lecture 61: Create report and detailing drawings in ETABSVideo lesson
-
62Lecture 62: Modeling fluid viscous dampers FVD to resist lateral loads in ETABSVideo lesson
-
63Lecture 63: Assign temperature loads to the building in ETABSVideo lesson
-
64Lecture 64:Eartquake system percentage for shear wall and dual system or MRFVideo lesson
-
65Merge two model ETABS in one file and show rendered viewVideo lesson
-
66General IntroductionVideo lesson
-
67New features in ETABS V19 (what's new)Video lesson
-
68Shear wall, special moment frame, and dual system IntroductionVideo lesson
-
69Viscous damper IntroductionVideo lesson
-
70Effect of sub modulus parameter IntroductionVideo lesson
-
71Define and modeling the outrigger in ETABSVideo lesson
-
72Results with the outriggerVideo lesson
-
73Moment frame modeling in ETABSVideo lesson
-
74Results with moment frame systemVideo lesson
-
75Dual system modeling in ETABSVideo lesson
-
76Results with dual systemVideo lesson
-
77Fluid Viscous Damper DefinitionVideo lesson
-
78Fluid Viscous Damper Modeling in ETABSv19Video lesson
-
79Effect of Fluid Viscous Damper on the response spectrum of the TowerVideo lesson
-
80Effect of sub modulus parameter on High Rise BuildingsVideo lesson
